From - Sat Oct 5 10:36:47 1996 Message-ID: <3253AB63.84D@cedar-rapids.net> Date: Thu, 03 Oct 1996 05:02:43 -0700 From: Rodger Boots Organization: cedar-rapids.net X-Mailer: Mozilla 3.0 (Win16; I) MIME-Version: 1.0 Newsgroups: rec.games.video.arcade.collecting To: John DeGroof Subject: Re: looking for edge connectors References: <3253755b.982598904@nntp.ix.netcom.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit NNTP-Posting-Host: sl2.cedar-rapids.net Lines: 33 Path: masters0.news.internex.net!newshub.internex.net!newshub1.internex.net!newshub1.home.net!enews.sgi.com!www.nntp.primenet.com!nntp.primenet.com!howland.erols.net!newsfeed.internetmci.com!news-out.microserve.net!news-in.microserve.net!news.paonline.com!news3.paonline.com!sl2.cedar-rapids.net John DeGroof wrote: > > I've looked in my local electronics shops (Radio Shack, MarVac Dow, > Fry's, etc.) and haven't found any edge connectors. > > I need female 56-pin (JAMMA) and 60-pin edge connectors with solder > terminals. > > Also, is there such a thing as a male edge connector with solder > terminals, something I could make a JAMMA extension harness from? > > Thanks in advance. JAMMA is .156" spacing by 56 pins. The least expensive here would be EDAC 307-056-500-202 which Digi-Key sells as part number EDC307560-ND for $3.94 each ($34.93 for 10). Their phone number is 1-800-DIGI-KEY. Happ Controls sells JAMMA connectors for $2.75 each (part number 49-0011-00). They also have them with the wires already attached for $16 as part number 80-5100-00 or with the control panel breakout with a separate connector for $32 as part number 80-5000-00. Happ can be reached at 847-593-6130. As for 60 pins, the only contact spacing I can find that uses 60 pins is .1" spacing. If that will do, try Digi-Key part number S1302-ND at $5.11 each for solder eyelet type made by Sullins---a high quality but somewhat expensive connector maker. If .1" spacing is what you really want, are you trying to make a ribbon cable assembly to connecto two boards? If so, these are also available either ready made (at close to $40 each!) or as individual parts.